Ducati SuperSport Forum banner
1 - 12 of 12 Posts

·
Registered
Joined
·
836 Posts
Discussion Starter · #1 ·
Now I know this may be a minor issue, and I know some of you have simply removed them, but this is what I came across today when I was spritzing down my bike. I was doing the front fender/fork area when my hand brushed one of the recflectors on the fork/shock. It was loose and barely hanging, its double sided foam tape had come loose on both reflectors. Not only that, but the reflectors weren't placed properly on the shock when I compared it to pics of the SuperSport on Ducatis website. They were kind of situated over the bump out of the shock. I took the foam tape off and for a quick fix readhered them with squares of Velcro that were almost the perfect size. Just something for you all to keep an eye out for if you choose to leave them on. :nerd:
 

·
Registered
Joined
·
67 Posts
I think ducati probably figured out that 99% of owners strip them off as their first mod. I know I do. It was pleasantly suprising that they were not superglued to the forks like they were on my monsters. I rip the reflectors off of all of my bicycles too. Arguably they could be considered a safety feature, but more of an eye sore imho.
 

·
Premium Member
Joined
·
5,240 Posts
I took mine off at the dealer on the showroom floor while waiting on the paperwork to be completed. I just reached down and pulled them off with little to no force.
 

·
Registered
Joined
·
2 Posts
Now I know this may be a minor issue, and I know some of you have simply removed them, but this is what I came across today when I was spritzing down my bike. I was doing the front fender/fork area when my hand brushed one of the recflectors on the fork/shock. It was loose and barely hanging, its double sided foam tape had come loose on both reflectors. Not only that, but the reflectors weren't placed properly on the shock when I compared it to pics of the SuperSport on Ducatis website. They were kind of situated over the bump out of the shock. I took the foam tape off and for a quick fix readhered them with squares of Velcro that were almost the perfect size. Just something for you all to keep an eye out for if you choose to leave them on. 🤓
I planned to take mine off and replace them - see pic - and I had to barely touch them to watch them fall off 😃 anyhow, I had found this company that manufactures ECE certified reflective stickers that look a lot nicer than the original chocolate bar sized monsters.
Carbon Audio equipment Gas Cylinder Tints and shades

Found them here: https://www.eiweiss-raceparts.de/en...1VVe1k7wRhdSoxhdVxgEq1DVUQW3rHRaBZppoIIcx-OGU
 
1 - 12 of 12 Posts
Top