Ducati SuperSport Forum banner

Missing screw

1042 Views 4 Replies 2 Participants Last post by  Ed K
A few others have posted about a few different either missing at factory or lost screws.

Here's one more to report.

Right front oil cooler shroud screw is missing.

Shown as #17 on shroud (not fairing #17), but in my case on the left side.

See less See more
1 - 5 of 5 Posts
That's an odd one, it mounts into the radiator cover and it's under stress since the radiator cover wants to pull backwards. Strange that come loose, must be a techie at the 1st service. It's a stainless steel bolt just as the two upper radiator cover bolts that attach the upper fairings to the radiator sides.
That's an odd one, it mounts into the radiator cover and it's under stress since the radiator cover wants to pull backwards. Strange that come loose, must be a techie at the 1st service. It's a stainless steel bolt just as the two upper radiator cover bolts that attach the upper fairings to the radiator sides.
Yes, I noticed it's under stress, and need to pull shroud to line up.

Does this cover come off on first service?
Yes, I noticed it's under stress, and need to pull shroud to line up.

Does this cover come off on first service?
Mine did because they have to check all gaskets etc for oil leaks and cracks or whatever else has gone wrong with past ducati engines.
Not sure if was #17, but just got it fixed already... screw that goes through to fairing clip.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top