Ducati SuperSport Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
106 Posts
Discussion Starter · #1 ·
Just a heads up. Not all 'add on' front fork pre load adjusters for the 950s Ohlins fit. The top of the fork is encroached by the riser. The photo is of Oberon adjusters, they foul the riser by about 1mm meaning they won't turn a full turn. Oberon we're great about the return and apologised - but they can't make something that fits every bike.
Automotive lighting Vehicle Automotive tire Plant Motor vehicle

The reason I got a pair was to set up the sag properly on my 950s and I didn't want to mark the lovely blue anodised preload adjusters - in the end, after being inspired by watching a jeweller remove watch hands with a plastic bag as protection I did the same with the 17mm socket needed to adjust preload. Bag on adjuster then socket on top. Much less fiddly that trying to use electrical tape! No marks on the adjuster.
Automotive tire Automotive lighting Motor vehicle Bicycle part Vehicle brake
 

·
Registered
Joined
·
1,970 Posts
I've got a plastic socket that fits over the preload adjuster and then you fit a 'normal' socket over that.
 
  • Like
Reactions: tea2jay and Ed K
1 - 3 of 3 Posts
Top