Ducati Supersport 939 Forum banner
1 - 20 of 41 Posts

·
Registered
Joined
·
397 Posts
Discussion Starter · #1 ·
I was under the impression that one either owns a 6 bolt rear hub or a 5 bolt rear hub Re: SSArm Ducatis. So, one need only make sure that the Ducati compatible stand matches the 5 or 6.

Was just about to order this on Ebay when I noticed the posting has a "compatibility finder", so I filled out for 2017 SS and it said

"This part is not compatible with 2017 Ducati Super Sport"

(head scratch) Soooooo.....is my initial paragraph in error?

Ducati Diavel & Monster 1200 Single Sided Swingarm Stand (all 6 bolt rear hubs)
 

·
Registered
Joined
·
97 Posts
No one has a rear stand for their bike???
I do... but I use PitBull stands. I have the Single-sided rear, and their forklift stand, but not much help to your original question. Sorry!
 

·
Registered
Joined
·
97 Posts

·
Registered
Joined
·
886 Posts
I'm using a Pitbull universal swingarm stand and a set of Speedymoto spools/sliders through the hub. This way I can use the stand with all the bikes in my garage, at least until I need to take the rear wheel off.
 

·
Registered
Joined
·
4,431 Posts
I was under the impression that one either owns a 6 bolt rear hub or a 5 bolt rear hub Re: SSArm Ducatis. So, one need only make sure that the Ducati compatible stand matches the 5 or 6.

Was just about to order this on Ebay when I noticed the posting has a "compatibility finder", so I filled out for 2017 SS and it said

"This part is not compatible with 2017 Ducati Super Sport"

(head scratch) Soooooo.....is my initial paragraph in error?

Ducati Diavel & Monster 1200 Single Sided Swingarm Stand (all 6 bolt rear hubs)
You want a 40mm spigot / pin same as the monster and multistrada and diavel and panigale. Remember it's ebay afterall !!
 

·
Premium Member
Joined
·
198 Posts
I bought the Ducati Rear Paddock Stand and it works great. Part#: 96797310B. Not cheap, $330 including shipping.
 

·
Registered
Joined
·
349 Posts
I'm using a Pitbull universal swingarm stand and a set of Speedymoto spools/sliders through the hub. This way I can use the stand with all the bikes in my garage, at least until I need to take the rear wheel off.
I did the same thing with my Monsters, but with a cheapo stand. Great minds? :wink2:
Got into a bad habit of just positioning the stand and then cranking it up before moving the bike upright. Over the years, it put too much strain on one leg and started bending it. Could have prevented that but didn't for some unknown reason. :eek:
Now use PitBull hybrid with reversible handle.
 

·
Registered
Joined
·
149 Posts
I have a Ducati stand, that once was bought for a Ducati Street Fighter. Fits perfectly.
 

·
Premium Member
Joined
·
728 Posts
I have the Abba stand with the kit that adds the wheels so you can move it around. Not as quick to deploy as the normal rear stand but the bike sits SOLID when its up.
 

·
Registered
Joined
·
516 Posts
I have the Abba stand with the kit that adds the wheels so you can move it around. Not as quick to deploy as the normal rear stand but the bike sits SOLID when its up.
I think we are going to have identical equipment soon. I also went with the Abba stand. Solid! Wish the swing arm pivot was a tad deeper.

Slightly off topic, what is the bolt hole for near the kickstand / chain?
 

Attachments

·
Registered
Joined
·
516 Posts
I have the Abba stand with the kit that adds the wheels so you can move it around. Not as quick to deploy as the normal rear stand but the bike sits SOLID when its up.
I think we are going to have identical equipment soon. I also went with the Abba stand. Solid! Wish the swing arm pivot was a tad deeper.

Slightly off topic, what is the bolt hole for near the kickstand / chain?
 

Attachments

·
Registered
Joined
·
132 Posts
Timely bump for the thread for me. Something I want to have here by the time the bike arrives.
.

Going by the pitbull list, ( https://www.pit-bull.com/motorcycle...-large-hub-includes-left-right-pins-f0099-210 ) I would suspect that either of these two (cheapest options in Oz) would fit as looks like 6 bolts..?. (Can one of you experts cast a quick glance over them and comment please.


This one is very cheap at AUD$148. delivered.

https://www.ebay.com.au/itm/Ducati-Diavel-Rear-Paddock-Stand-REVERSIBLE-REAR-STAND-RIGHT-LEFT-SIDE/222242090656?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2055119.m1438.l2649




And this other one at AUD$180 delivered.



https://www.ebay.com.au/itm/Ducati-...e=STRK:MEBIDX:IT&_trksid=p2055119.m1438.l2649


Edit: Huh, there's also this one from Italy for much the same price AUD$170 del.:
https://www.ebay.com.au/itm/Paddock-Stand-Swing-Arm-Motorcycle-Ducati-1098-1198-1199-Panigale-Diavel/192482943737?ssPageName=STRK%3AMEBIDX%3AIT&var=492526396729&_trksid=p2055119.m1438.l2649
 
1 - 20 of 41 Posts
Top