Ducati SuperSport Forum banner
1 - 2 of 2 Posts

·
Registered
2018 sss
Joined
·
8 Posts
Discussion Starter · #1 ·
Has anyone connected anything to their Supersport to gather telemetry data?
Either direct to bike's electrics or attached but independent to bike's electrics?
 

·
Premium Member
Joined
·
1,224 Posts
Depending on what you want...

Lonelec makes a cable that connects an ELM 327 ODBC device to the diagnostic port under the seat. You can connect to the ELM 327 using either wireless or Bluetooth. Apple devices used to have problems with the Bluetooth protocols used by an ELM 327 but I don't know if that is still the case.

You can then use an app like dashcmd to read the PIDs and get data. You can also read and clear error codes. You cannot, however, reset service lights.

There is a thread somewhere on this forum about the cable and apps, use the advanced search function and you should be able to track it down.

If you are after track related telemetry there are quite a few third party black boxes you can use.
 
1 - 2 of 2 Posts
Top