Looking good @pcastr03
A few questions.
The Rizoma mirrors look short, can you see behind with them or does your shoulder block the view?
Has the vibration issue that affected the OEM mirrors gone with the Rizoma ones?
Is the wiring routed through the mounting kit plate (which I know is a separate purchase) so as the wires are hidden?
Can you take a close up photo of where the mirror connects into the mounting plate - a photo from each side would be super helpful.

Thanks

 

Vibrations are gone. Wires run thru small hole on adaptor plate.

 

They are a tad shorter than stock mirrors, even with stock mirrors I had to lift my elbow to see behind so yes you have to do the same with these. To see behind now I have my 2nd phone on with rear camera view.

 

Thanks, have editted my original post with a few more questions.

 

I will never understand how people use low mounted mirrors or a phone on the tree to see behind them. How are you seeing what is in front of you at same time? Or is this a track only kind of thing, not something used on highway?

 

They are not low mounted mirrors and I mostly look at the rear when im stopped lol. I see what's in front of me by looking straight ahead. It's called multi-tasking all could be done in a less than a second.

 

In any event the bike looks really good. I have that same tail-light setup on my 939. The strobing brake and turn signals really make the bike more visible.

 

Thanks, yes very visable.

 

That pyramid rear fender extender looks longer than the ones I have seen before - where did you get it? (I think it says pyramid)

 

I brought it from pyramid directly in UK. Came within a week. Here's the link

Pyramid Hugger Extension | Matte Black | Ducati Supersport 950/S 2021>Current

Manufactured from ABSDesigned specifically to extend your bikes OEM Hugger by 140mmPyramid Hugger - Pyramid Motorcycle Accessories

pyramidmoto.co.uk

 

Do you have the part number for the rubber foot pegs? Also...do the ASV's offer more adjustment over stock? I find the stock ones still too far away, even with the closest setting.

 

96280441A

Just got rid of a set of these. Nothing wrong with them as a concept - I just wear boots with thick soles and prefer pegs with more grip

 

At $120.00 for a set...I don't think so!!

 

What about the levers?

 

Lever do offer more adjustability than stock.

 

Yes I do have the part# its 96280441A. I paid $75 on ebay. After Purchasing I also found them on Aliexpress. I know a lot of people say bad thing about chinese products but I have brought numerous parts from aliexpress and some of them for this bike were the frame sliders and bar risers, exact replicas for half the price and the quality is great.
Here's he link for them on aliexpress if your interested.

https://www.aliexpress.us/item/3256804761676479.html?spm=a2g0n.productlist.0.0.681943ce4kI2lB&browser_id=e4c69fac938a4e129cad97267595725f&aff_platform=msite&m_page_id=lfsphjflrccarjut18e43a9cd8a244fd778a1872fb&gclid=&pdp_npi=4%40dis%21USD%2135.98%2123.75%21%21%2135.98%2123.75%21%402103246417105321854646057ed2dc%2112000031117867780%21sea%21US%210%21AB&algo_pvid=ec8c8d01-4c4a-45ce-97fe-2bc4bb07779a

 

Chinese Products have been noted to use soft Aluminum Alloys reproducing parts which don't meet the required engineering for strength. Think twice about standing up on those foot pegs.

 

Please read correctly before commenting, the footpegs are OEM. I will take my chances and for the last 5 motorcycle I've owned and brought parts from "China" they have all been just fine with no issues. Even American companies cut corners and make substandard parts are you telling them to be careful with "standing on them pegs" Oh and by the way where do you think 90% manufacturers have their parts made..... China correct. So please save your 2 cents for the choir.

 

I guess I'm confused as you posted a link for the footpegs from Aliexpress. I see now you got them off ebay.
Your Comparing Ducati foot-pegs made in Italy to counterfeit copies made in China. You also think you bought genuine Evotech frame sliders from China even though it is a known fact Evotech hardware is made only in UK.
Looks are one thing, correct materials used making the item is another.

Ducati Performance 939 950 Supersport Footrest Set W/ Rubber Inserts 96280441A | eBay

Find many great new & used options and get the best deals for Ducati Performance 939 950 Supersport Footrest Set W/ Rubber Inserts 96280441A at the best online prices at eBay! Free shipping for many products!

www.ebay.com

 

Well, I'm totally satisfied with what I received. In the event of a crash, it doesn't matter where the materials were made. They will break, no "correct" materials as you stated are indestructible.

 

Hang on...I need to get my bag of popcorn...lol

 

Here you go:

Peking Duck Fat Popcorn

Our Signature Sweet & Savory Popcorn - what dreams are made of! Who doesn't love a little duck fat and cracklings of Peking duck morsels... Our PEKING DUCK POPCORN is a Good Food Award WINNER! It takes 3 days to prepare and roast the duck, then we break down all the delicious cracklings and meat...

shop.chinalivesf.com

 

@Swamper

Anyone here garnish their popcorn with nutritional yeast? Saw that written and tried it. The idea is that it gives a savory taste and allows for less butter. It was pretty good, made the mistake of fixing a few nights in a row for TV snack. Paid the price later. For me popcorn is maybe a weekly or just save it for the movies thing now. I learned my lesson.

 

As long as your satisfied that's what counts.

 

China stuff can be bad but often it is actually solid. I got a pair of off road styled foot pegs (not for the SS obv) from some no name eBay seller in China which turned out to be great quality. I also got some Puig foot pegs for the 939 I had and for the price, there’s no way they were manufactured in a European country. Solid quality though.

 

@pcastr03
Hi bud! Very cool looking bike you have! Do you have pictures of the bike from the front with Rizoma mirrors installed. I'm thinking between the black ones and black-silver ones and cannot decide =(

Another question - how many wiring kits you need to install the mirrors? Just one EE047H?

 

Question for you: the Ram mount ball on the handlebar - which size is required for the thread?

Thanks in advance.

 

Hey sorry for responding so late. The Ram ball mount on the handle bar does have not have threads. Its just like the bar ends. Has a screw that expands inside the bar end to hold it